Skip to content
Move
  • There are no suggestions because the search field is empty.

Reformatting the Z-Cams

To reformat the Z-Cams, you will need to do this through the Web browser

Reformatting SD Cards

  1. Open up your web brower
  2. Input the cameras Ethernet IP Address: (e.g 10.98.32.1)
    1. http://10.98.32.1/www/html/controller.html
  3. Click Settings > Maintenance
  4. Click Format Card
    1. You will be prompted to log in as an administrator before proceeding.
    2. The default username and password are below
      1. Username: admin
      2. Password: Admin_123
  5. Either change the default password or click Cancel.
  6. Open the Maintenance tab in Settings and click Format Card again
    1. Once you are ready, click Delete All Items